10-09-2012 09:22 PM
I would like to use a SRP500 series router in a DMVPN solution. Or perhaps there is another scalable VPN solution I could use?
Sent from Cisco Technical Support iPhone App
Solved! Go to Solution.
10-09-2012 09:42 PM
Hi kevin, dmvpn relies on cef and routing protocols such as eigrp, ospf, etc. The small business products support only ieee standards, excluding cdp.
10-10-2012 01:32 AM
Hi Kevin,
That is correct - the SRP only supports point to point VPNs (connecting to a 2811 works).
For DMVPN, you will need a IOS router.
Regards,
Andy
10-09-2012 09:42 PM
Hi kevin, dmvpn relies on cef and routing protocols such as eigrp, ospf, etc. The small business products support only ieee standards, excluding cdp.
10-09-2012 10:55 PM
Hi Thomas
Would the only option then be a site to site VPN built between the HUB (2811 Router) and each spoke? The config would get messy as the number of Hubs increased.
Sent from Cisco Technical Support iPhone App
10-10-2012 01:32 AM
Hi Kevin,
That is correct - the SRP only supports point to point VPNs (connecting to a 2811 works).
For DMVPN, you will need a IOS router.
Regards,
Andy
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: