Hi ,
I have a problem with my router 881G-4G stuck in Rommon Mode after reboot.
showing
System Bootstrap, Version 15.4(3r)M1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2014 by cisco Systems, Inc.
Total memory size = 1024 MB
C881G-4G-GA-K9 platform with 1048576 Kbytes of main memory
Main memory is configured to 32 bit mode
Readonly ROMMON initialized
boot: cannot open "flash:"
boot: cannot determine first executable file name ondevice "flash:"
System Bootstrap, Version 15.4(3r)M1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2014 by cisco Systems, Inc.
Total memory size = 1024 MB
C881G-4G-GA-K9 platform with 1048576 Kbytes of main memory
Main memory is configured to 32 bit mode
Readonly ROMMON initialized
rommon 1 >
When I run dev command it is showing
rommon 1 > dev
Devices in device table:
id name
flash: compact flash
bootflash: boot flash
usbflash0: usbflash0
rommon 2 > dir flash:
dir: cannot open device "flash:"
rommon 3 > dir bootflash:
%Invalid CF device: 2device does not contain a valid FS
dir: cannot open device "bootflash:"
rommon 4 > dir usbflash0
bad device name
usage: dir <device>
rommon 5 >
any idea for this issue?Please!
