cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1143
Views
0
Helpful
3
Replies
Highlighted
Beginner

Cisco RV042 Dual WAN VPN Router

We just bought the RV042 and need to understand how to config the below

I have 2 Internet Connection and connected to 2 WAN Ports and now I want few computers to get the Internet connection from WAN 1 and Few Computers from WAN 2.. How do I setup this? I have enabled DHCP so the router now gives the IP to computers

3 REPLIES 3
Highlighted
Participant

Need to check if the Source Based Routing or Policy Based Routing can be configured.

 

Share the IOS version you are using ..

 

--

Parvesh

Highlighted

Hello Parvesh,
 
I am using Cisco Small Business RV042 10/100 4-Port VPN Router and Firmware Version: v4.2.3.03 and I do have the following under Setup > Advance Routing and it has the below details
 
Destination IP :
Subnet Mask :
Default Gateway :
Hop Count (Metric, max. is 15) :
Interface : Options are LAN, WAN1 and WAN2
 
I tried the below settings to that 192.168.1.1.103 is going to Internet line 2 which is WAN2
 
Destination IP : 192.168.1.103
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
Hop Count (Metric, max. is 15) : 1
Interface : Selected WAN2
 
Also I click on save the routing tables changed the value to 192.168.1.0
 
Thanks
Satish Kumar
 
Highlighted

Any idea's ?