Cisco RV042 Dual WAN VPN Router

[satishkumardas]

We just bought the RV042 and need to understand how to config the below

I have 2 Internet Connection and connected to 2 WAN Ports and now I want few computers to get the Internet connection from WAN 1 and Few Computers from WAN 2.. How do I setup this? I have enabled DHCP so the router now gives the IP to computers

[Parvesh Paliwal]

Need to check if the Source Based Routing or Policy Based Routing can be configured.

Share the IOS version you are using ..

--

Parvesh

[satishkumardas]

Hello Parvesh,

I am using Cisco Small Business RV042 10/100 4-Port VPN Router and Firmware Version: v4.2.3.03 and I do have the following under Setup > Advance Routing and it has the below details

Destination IP :

Subnet Mask :

Default Gateway :

Hop Count (Metric, max. is 15) :

Interface : Options are LAN, WAN1 and WAN2

I tried the below settings to that 192.168.1.1.103 is going to Internet line 2 which is WAN2

Destination IP : 192.168.1.103

Subnet Mask : 255.255.255.0

Default Gateway : 192.168.1.1

Hop Count (Metric, max. is 15) : 1

Interface : Selected WAN2

Also I click on save the routing tables changed the value to 192.168.1.0

Thanks

Satish Kumar

[satishkumardas]

Any idea's ?