Cisco RV340 with Active directory use Authentication

[Hari Kumar Raja]

Hello , 

i recently purchased Cisco RV340 and my current Firmware Version: 1.0.03.20 , i have configured ssl vpn with local users and able to connect with out any issues, i have an Active Directory and when i am trying to configure with my AD it was not authentication , i tried to configure as showing in cisco blogs but failed , can any one please help me out how can i fix this issue . 

using Win2019 Standard server . 

regards

Hari

[balaji.bandi]

tell us what steps you followed :

1. you need to setup user accounts with Remote Authentication Service

2. Integrated with AD

3. you need to add your Device in AD as trusted device

follow below guide :

https://thesolving.com/server-room/configure-radius-server-windows-authenticate-cisco-vpn-users/

4. make a Groups so user will be part of VPN

check Logs both the side windows event logs and RV 340 what is the logs shows when the user dialed in ?

[Hari Kumar Raja]

Hi Balaji ,

i tried with this but no luck , i have configured radius on my win2019
server and when i am trying with AD users which was in group getting the
error . the authentication was thrown back .

attached log for cisco rv340 . can u please help me to fix this out .

regards
Hari

[balaji.bandi]

So you are using Radius authentication, intern radius do AD lookup ? is this correct?

in this case you need to see related between radius and AD connection.

your Logs are missing ?

[Hari Kumar Raja]

yes ,

i have a AD setup for my users , most of the users will work remotely and
want to integrate with my AD , so we dont need to create local users and
they can use same domain logins to login .

attaching logs again .

regards
Hari

[balaji.bandi]

Your Logs still missing . - make sure attached correctly.

let me brief again.

1 user dial in to RV

2 RV use Radius to authenticate users

3. Radius installed in windows box - what radius ? is this windows NPAS ?

4. Do you have relation between Radius and AD in the same server for the users access ?

[Hari Kumar Raja]

Hi Balaji , 

any luck for my issue . 

regards

Hari

[balaji.bandi]

Your Logs still missing . - make sure attached correctly.

let me brief again.

1 user dial in to RV

2 RV use Radius to authenticate users

3. Radius installed in windows box - what radius ? is this windows NPAS ?

4. Do you have relation between Radius and AD in the same server for the users access ?

[Hari Kumar Raja]

I solved this my self after downgrading my DC from 2019 to 2016 , its worked with out any major changes in RV . 

Thank you Balaji for your assistance . 

regards

Hari

[balaji.bandi]

thanks for feed back and glad all working as expected at end.