11-27-2019 06:10 AM
I need to know how to create a Guest WIFI in case my family members or friends come over on the Cisco 130W Small Business router. I read through the Admin Manual Guide online, but it is confusing. Do I need to create a VLAN ID first and then add that on the Network section as the Guest Network?
11-27-2019 08:55 AM
here is the guide to create one :
11-27-2019 09:42 AM - edited 11-27-2019 10:06 AM
I should of mentioned that I read that same guide you posted. However, the guide mentions other network switches and appliances like the SG300 or the WPA371. I only have a modem from my ISP and the RV130W router. So, in that case, which steps should I need to follow from the guide to configure a Guest WiFi only on the RV130W router?
By the way, is this model of router still supported?
11-27-2019 12:44 PM
Most of the process is same you creating 2 SSID one of Guest and one for your use.
the document provide you guidance on how you can achieve creating SSID and allocate and allowed rules same
another guide: Hope this helps you in short.
11-28-2019 12:53 AM - edited 11-28-2019 12:54 AM
I am still a bit confused about the port assignments such as Tagged, Untagged, and Exclude.
The guide is not for my scenario as I only have a basic Home network setup using a modem and the RV130W router. So this case, what should I choose as the port assignment for the Guest WiFi?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: