I need to know how to create a Guest WIFI in case my family members or friends come over on the Cisco 130W Small Business router. I read through the Admin Manual Guide online, but it is confusing. Do I need to create a VLAN ID first and then add that on the Network section as the Guest Network?
here is the guide to create one :
I should of mentioned that I read that same guide you posted. However, the guide mentions other network switches and appliances like the SG300 or the WPA371. I only have a modem from my ISP and the RV130W router. So, in that case, which steps should I need to follow from the guide to configure a Guest WiFi only on the RV130W router?
By the way, is this model of router still supported?
Most of the process is same you creating 2 SSID one of Guest and one for your use.
the document provide you guidance on how you can achieve creating SSID and allocate and allowed rules same
another guide: Hope this helps you in short.
I am still a bit confused about the port assignments such as Tagged, Untagged, and Exclude.
The guide is not for my scenario as I only have a basic Home network setup using a modem and the RV130W router. So this case, what should I choose as the port assignment for the Guest WiFi?