cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1044
Views
0
Helpful
0
Replies

FindIT 2.0 Discovery failed! Device IP address does not match! any Solution?

Hi,

I am from ASIA, My FindIT 2.0 discovery when i was setup my VPN 160W series Router and Switched SF300/24 IP 192.168.1.1 and 192.168.2.1 this FindIT 2.0 Discovery Protocol cannot showing Routers Icon but it also worked well Ping, Interface IP configuration and all. This FindIT2.0 Discovery show only IP subnet 192.168.x.255 only.

If I configuration my SF300 Switch 192168.2.1 it's work! but problem is FindIT2.0 discovery it's cannot show Router 192.168.1.1.

"Device IP address does not match local subnet and may not be reachable".

It's work well all local subnet Ping, GUI interface configuration, SSH, work well. etc.

Because My Cisco Network ISP Business Network Topology is many local Subnetting deployments. I want view all in here for my only Cisco Network Management FindIT2.0 Subnetting IP Router and Switched. FindIT2.0 this is Helpful.

I am waiting for this solutions.

Thank you very much.

 

Foysal ISP Broadband Metro WiFi

Owner, Administrator, Director

https://FoysaliSP.com

https://FoysaliSP.net

https://Foysal.Name

 

Foysal
0 Replies 0