cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.

904
Views
0
Helpful
1
Replies

How to build port forwarding with RV042 G ?

Hi All,

There are lot of work over configuring one RV042G:

hardware is RV042G V01

software is v4.2.2.08

We have to configure outside access to WEB and FTP server inside:

<outside IP>:8080 ->forward to -> 192.168.10.222:80

<outside IP>:8020 ->forward to -> 192.168.10.222:20

<outside IP>:8021 ->forward to -> 192.168.10.222:21

I tried also second network address from 192.168.1.0/24, using DMZ host, configure firewall rules, but nothing happens.

Please advise me, if someone knows - what is the way to configure port forwarding at this device.

Iskren

1 REPLY 1
Ismael Arroyo
Beginner

For port forwarding you would need to navigate under UPnp settings and create services 8080,8020,8021 as external ports

the internal will be 80,20,21. Add the 3 services to 192.168.10.222 then enable and add to list. Hope this helps with  port forwarding.

Let us know if this works for you.