Hello,
I have the SRP527W model.
The situation is the devices are taking the IP address from the DHCP pool and I am running out.
The setting for the client lease time is 0 = 0 means one day
I could change it to 5 = 5 mins at start up
How do i change the settings so other devices that are not on the network anymore give back the Ip addresses to the pool and not keep them forever. I am running out of IP address in the DHCP pool and have so far have a max of 120 users.
I would also like to note I ve not set any of these addresses as static to the client. If they are not on the network after a week, the ip address should go back to the pool, whats going on?
Thanks