cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Get the latest new and information the November issue of the Cisco Small Business Monthly Newsletter

1697
Views
0
Helpful
2
Replies
Highlighted
Beginner

%IPROUTETABLE-A-ROUTETABLEOVERFLOW: IP routing table overflow: failed to add route address 0.0.0.0, mask 0.0.0.0, nexthop 192.168.1.1

hi

this is the first time that i post something on this forum - please allow me some degree of understanding as i do not work in network.

i am just setting up a small lab

i have a SG300 swtch in L3 mode, and it seems to lock up the aggregated ports (LAG) that i have setup

they work fine for a while - but then the system stops responding and i find this on the switch log (see below).

i have editing the network configuration on the system (debian 6) but nothing worked.

as soon as i edit something minor on the switch or reboot it.

i have network access to the debian system restored.

so i believe the problem is with the switch.

the router that distributes the IP is an old netgear (sorry!)

the messages below make so sense to me.

i would sincerely appreciate assistance in solving this problem.

please let me know if further info is needed.

thanks,

Nicolas

2147476713     2013-May-02 08:06:54    Informational         %AAA-I-CONNECT: New https connection for user cisco, source     192.168.1.23 destination 192.168.1.254 ACCEPTED     

2147476714     2013-May-02 08:06:53    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (1)     

2147476715     2013-May-02 08:06:15    Alert         %IPROUTETABLE-A-ROUTETABLEOVERFLOW: IP routing table overflow:     failed to add route address 0.0.0.0, mask 0.0.0.0, nexthop     192.168.1.1     

2147476716     2013-May-02 08:06:15    Informational         %BOOTP_DHCP_CL-I-DHCPRENEWED: The device has been renewed the     configuration on interface Vlan 1 , IP 192.168.1.254, mask     255.255.255.0, DHCP server 192.168.1. 1    

2147476717     2013-May-02 08:05:32    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (2)     

2147476718     2013-May-02 08:03:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476719     2013-May-02 08:02:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (3)     

2147476720     2013-May-02 07:58:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476721     2013-May-02 07:57:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (3)     

2147476722     2013-May-02 07:53:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476723     2013-May-02 07:52:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (2)     

2147476724     2013-May-02 07:51:15    Alert         %IPROUTETABLE-A-ROUTETABLEOVERFLOW: IP routing table overflow:     failed to add route address 0.0.0.0, mask 0.0.0.0, nexthop     192.168.1.1     

2147476725     2013-May-02 07:51:15    Informational         %BOOTP_DHCP_CL-I-DHCPRENEWED: The device has been renewed the     configuration on interface Vlan 1 , IP 192.168.1.254, mask     255.255.255.0, DHCP server 192.168.1. 1    

2147476726     2013-May-02 07:48:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476727     2013-May-02 07:39:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (3)     

2147476728     2013-May-02 07:36:15    Alert         %IPROUTETABLE-A-ROUTETABLEOVERFLOW: IP routing table overflow:     failed to add route address 0.0.0.0, mask 0.0.0.0, nexthop     192.168.1.1     

2147476729     2013-May-02 07:36:15    Informational         %BOOTP_DHCP_CL-I-DHCPRENEWED: The device has been renewed the     configuration on interface Vlan 1 , IP 192.168.1.254, mask     255.255.255.0, DHCP server 192.168.1. 1    

2147476730     2013-May-02 07:35:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476731     2013-May-02 07:34:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (2)     

2147476732     2013-May-02 07:30:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476733     2013-May-02 07:27:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (1)     

2147476734     2013-May-02 07:25:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476735     2013-May-02 07:24:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (4)     

2147476736     2013-May-02 07:21:15    Alert         %IPROUTETABLE-A-ROUTETABLEOVERFLOW: IP routing table overflow:     failed to add route address 0.0.0.0, mask 0.0.0.0, nexthop     192.168.1.1     

2147476737     2013-May-02 07:21:15    Informational         %BOOTP_DHCP_CL-I-DHCPRENEWED: The device has been renewed the     configuration on interface Vlan 1 , IP 192.168.1.254, mask     255.255.255.0, DHCP server 192.168.1. 1    

2147476738     2013-May-02 07:20:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (2)     

2147476739     2013-May-02 07:17:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476740     2013-May-02 07:16:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (4)     

2147476741     2013-May-02 07:12:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476742     2013-May-02 07:09:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (2)     

2147476743     2013-May-02 07:06:15    Alert         %IPROUTETABLE-A-ROUTETABLEOVERFLOW: IP routing table overflow:     failed to add route address 0.0.0.0, mask 0.0.0.0, nexthop     192.168.1.1     

2147476744     2013-May-02 07:06:15    Informational         %BOOTP_DHCP_CL-I-DHCPRENEWED: The device has been renewed the     configuration on interface Vlan 1 , IP 192.168.1.254, mask     255.255.255.0, DHCP server 192.168.1. 1    

2147476745     2013-May-02 07:05:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (1)     

2147476746     2013-May-02 07:04:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476747     2013-May-02 07:03:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (3)     

2147476748     2013-May-02 06:59:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476749     2013-May-02 06:54:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (3)     

2147476750     2013-May-02 06:51:15    Alert         %IPROUTETABLE-A-ROUTETABLEOVERFLOW: IP routing table overflow:     failed to add route address 0.0.0.0, mask 0.0.0.0, nexthop     192.168.1.1     

2147476751     2013-May-02 06:51:15    Informational         %BOOTP_DHCP_CL-I-DHCPRENEWED: The device has been renewed the     configuration on interface Vlan 1 , IP 192.168.1.254, mask     255.255.255.0, DHCP server 192.168.1. 1    

2147476752     2013-May-02 06:50:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476753     2013-May-02 06:49:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (3)     

2147476754     2013-May-02 06:45:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476755     2013-May-02 06:44:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (3)     

2147476756     2013-May-02 06:40:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476757     2013-May-02 06:39:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (2)     

2147476758     2013-May-02 06:36:15    Alert         %IPROUTETABLE-A-ROUTETABLEOVERFLOW: IP routing table overflow:     failed to add route address 0.0.0.0, mask 0.0.0.0, nexthop     192.168.1.1     

2147476759     2013-May-02 06:36:15    Informational         %BOOTP_DHCP_CL-I-DHCPRENEWED: The device has been renewed the     configuration on interface Vlan 1 , IP 192.168.1.254, mask     255.255.255.0, DHCP server 192.168.1. 1    

2147476760     2013-May-02 06:35:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (1)     

2 REPLIES 2
Hall of Fame Master

%IPROUTETABLE-A-ROUTETABLEOVERFLOW: IP routing table overflow: f

Wrong forum, post in "small business routers". You can move your post using the actions panel on the right.

Beginner

%IPROUTETABLE-A-ROUTETABLEOVERFLOW: IP routing table overflow: f

moved as suggested by Paolo.

the equipment that i am having problem with is a SG300-10 (cisco)

while the router (which is working fine) is from Netgear.

thanks,