Linksys PAP2T Password

[Lorn Olsen]

I have a PAP2T sn# FLI00L317569 that I purchased at eBay. The device was advertised as a PAP2T-NA. When I received it it is labeled as Sparrow voipalarm.com. I can't login to admin to reset the device because there is an admin password in place. I called Sparrow at 877-777-8906. They said to call Linksys at 800-326-7114. They said to call Cisco at 866-606-1866. They said to go to support forums.cisco.com... So, here I am. Can you give me the password? I have already tried: 7756112#, 5465866#, 78196365#, 50274537#, 8995523#

Thanks, Lorn 248-345-0500

[stpa67001]

I am not sure this will work but i googled "pap2t factory reset" and found this http://sbkb.cisco.com/CiscoSB/GetArticle.aspx?docid=e82eab4938ad4c968450622d14126786_Factory_Reset_on_PAP2T_Phone_Adapter_using_Interactive_Voice.xml&pid=2&converted=0 could be worth giving it a try.

[Lorn Olsen]

When you do what Cisco suggests, the device wants a password before it will do the reset.

[stpa67001]

Found this on Linksys forums:

- "Reset PAP2-NA to factory default: ****73738# if it asks for password, use 8995523# or 7756112# or 5465866# or 50274537# or 78196365# (One of these numbers should work for you) enter 1 to confirm, press #, Hang up. More: To check your PAP2's IP: Pick up phone, connected to PAP2: ****110# The voice will tell current IP (example: 192.168.1.103). Now you can get into PAP2 setup pages without password. In address bar of your internet browser type http://192.168.1.103/admin/advance (I use the same example) Press Enter. Hope it helps."

After this i have no idea.