cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
167
Views
0
Helpful
1
Replies
Highlighted
Beginner

My GPO(Group Policy Object) is being blocked by my ACL

Hi all, I can't seem to find a way to allow my GPO to pass through my core router(which has ACL running). I was able to determine that the cause of this was the packets were being blocked by the ACL because if I remove the ACL on the VLAN, the GPO takes effect on the client PC going to my servers. 

 

here are the ACL commands I used in my lab environment, most of them are for AD

 

permit udp any eq bootpc any eq bootps
permit icmp 10.10.20.0 0.0.0.255 10.10.100.0 0.0.0.255 echo-reply
permit udp 10.10.100.0 0.0.0.255 10.10.20.0 0.0.0.255 eq 138
permit udp 10.10.20.0 0.0.0.255 10.10.100.0 0.0.0.255 eq 138
permit udp 10.10.100.0 0.0.0.255 10.10.20.0 0.0.0.255 eq 137
permit udp 10.10.20.0 0.0.0.255 10.10.100.0 0.0.0.255 eq 137
permit tcp 10.10.100.0 0.0.0.255 10.10.20.0 0.0.0.255 eq 138
permit tcp 10.10.20.0 0.0.0.255 10.10.100.0 0.0.0.255 eq 138
permit udp 10.10.100.0 0.0.0.255 10.10.20.0 0.0.0.255 eq 636
permit udp 10.10.20.0 0.0.0.255 10.10.100.0 0.0.0.255 eq 636
permit tcp 10.10.100.0 0.0.0.255 10.10.20.0 0.0.0.255 eq 636
permit tcp 10.10.20.0 0.0.0.255 10.10.100.0 0.0.0.255 eq 636
permit udp 10.10.100.0 0.0.0.255 10.10.20.0 0.0.0.255 eq 445
permit udp 10.10.20.0 0.0.0.255 10.10.100.0 0.0.0.255 eq 445
permit tcp 10.10.100.0 0.0.0.255 10.10.20.0 0.0.0.255 eq 445
permit tcp 10.10.20.0 0.0.0.255 10.10.100.0 0.0.0.255 eq 445
permit udp 10.10.100.0 0.0.0.255 10.10.20.0 0.0.0.255 eq 464
permit udp 10.10.20.0 0.0.0.255 10.10.100.0 0.0.0.255 eq 464
permit tcp 10.10.100.0 0.0.0.255 10.10.20.0 0.0.0.255 eq 464
permit tcp 10.10.20.0 0.0.0.255 10.10.100.0 0.0.0.255 eq 464
permit tcp 10.10.20.0 0.0.0.255 10.10.100.0 0.0.0.255 eq 123
permit tcp 10.10.20.0 0.0.0.255 10.10.100.0 0.0.0.255 eq 88
permit tcp 10.10.20.0 0.0.0.255 10.10.100.0 0.0.0.255 eq 389
permit tcp 10.10.20.0 0.0.0.255 10.10.100.0 0.0.0.255 eq domain
permit tcp 10.10.100.0 0.0.0.255 10.10.20.0 0.0.0.255 eq telnet
permit tcp 10.10.100.0 0.0.0.255 10.10.20.0 0.0.0.255 eq 123
permit tcp 10.10.100.0 0.0.0.255 10.10.20.0 0.0.0.255 eq 445
permit tcp 10.10.100.0 0.0.0.255 10.10.20.0 0.0.0.255 eq 88
permit tcp 10.10.100.0 0.0.0.255 10.10.20.0 0.0.0.255 eq 389
permit tcp 10.10.100.0 0.0.0.255 10.10.20.0 0.0.0.255 eq domain
permit icmp 10.10.100.0 0.0.0.255 10.10.20.0 0.0.0.255 echo-reply
permit udp 10.10.100.0 0.0.0.255 10.10.20.0 0.0.0.255 eq domain
permit udp 10.10.20.0 0.0.0.255 10.10.100.0 0.0.0.255 eq domain
permit udp 10.10.100.0 0.0.0.255 10.10.20.0 0.0.0.255 eq 389
permit udp 10.10.20.0 0.0.0.255 10.10.100.0 0.0.0.255 eq 389
permit udp 10.10.100.0 0.0.0.255 10.10.20.0 0.0.0.255 eq 123
permit udp 10.10.20.0 0.0.0.255 10.10.100.0 0.0.0.255 eq 123
permit udp 10.10.100.0 0.0.0.255 10.10.20.0 0.0.0.255 eq 88
permit udp 10.10.20.0 0.0.0.255 10.10.100.0 0.0.0.255 eq 88
permit tcp 10.10.20.0 0.0.0.255 10.10.100.0 0.0.0.255 eq 135
permit tcp 10.10.100.0 0.0.0.255 10.10.20.0 0.0.0.255 eq 135
permit tcp 10.10.20.0 0.0.0.255 10.10.100.0 0.0.0.255 eq 3268
permit tcp 10.10.100.0 0.0.0.255 10.10.20.0 0.0.0.255 eq 3268
permit tcp 10.10.20.0 0.0.0.255 10.10.100.0 0.0.0.255 eq 25
permit tcp 10.10.100.0 0.0.0.255 10.10.20.0 0.0.0.255 eq 25
permit tcp 10.10.20.0 0.0.0.255 10.10.100.0 0.0.0.255 eq 3269
permit tcp 10.10.100.0 0.0.0.255 10.10.20.0 0.0.0.255 eq 3269
permit tcp any any eq 443

 

Note: (10.10.100.0 is my server network and 10.10.20.0 is my Client pc network.)

All of this is from my lab environment.

 

Hope you can help me with this. Thank you

1 REPLY 1
Highlighted
Cisco Employee

HI Amiel,

 

What model is your core router that you are configuring the ACLs? Make sure you have allowed the right protocols/ports/services bidirectional traffic for the GPO to pass the core router.

 

Thanks,

Martin