Need help desperately for V042 IPSec VPN

[NewlyStarted]

I tried a lot of settings without avail.

Shall appreciate help.

Attached a document with full details.

Many thanks in advance please.

[Mehdi Boukraa]

Hi,

In this case you can use Qvpn (IPsec client) from your windows 7 to connect to the destination local (p.q.b.0)

For the configuration of Qvpn on RV042 you need just to create the VPN users and enable the remote management

on port 443

But in your topology the RV042 is behind a NAT so you need to configure the ADSL router to forward the following port : 500 UDP , 4500 UDP and 443 TCP to WAN interface of RV042 (p.q.a.2)

N.B : Qvpn doesn't support NetBios protocol

To download Qvpn:

http://software.cisco.com/download/release.html?mdfid=282414010&softwareid=282465795&release=1.4.2.1&relind=AVAILABLE&rellifecycle=&reltype=latest

Best Regards

Mehdi