03-27-2017 12:01 PM
Hello,
1.) I do not have a service contract. I am a contractor, so cannot use my employer's service contract.
2.) GNS3, a network emulator lab tool, to study for the CCNP.
3.) GNS3 recommends the following router images: C3640, C3660, C3725, C3745, C7200.
I don't necessarily need the hardware, just the images to load into the GNS3 tool, which runs on my laptop in a virtual environment.
How do I obtain these required images?
03-30-2017 07:31 PM
GNS3 is getting a bit dated, due to its ability to only support really old Cisco IOS images.
Check out Cisco's official tool, VIRL. I would put 12GB of RAM into your machine if you want to do any kind of serious simulation.
10-27-2017 05:02 PM
Hello DeniseAdams999.
You can download the most stable Cisco IOS images for GNS3 from the following link.
09-07-2018 01:01 PM
Thank you so much
08-24-2018 07:30 AM
I have the same query
How do I obtain these required images?
02-15-2019 01:40 AM
Hi,
Find below a link to download directly the cisco and Juniper ios for GNS3 simulation.
https://drive.google.com/drive/u/0/folders/0B60M1EcSOVirMWFWOVBMYUU0Uk0
And goog luck on your way to CCNP,
KJ
07-19-2022 04:38 AM
it not work... can u send here all cisco images for free?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: