cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.

532
Views
0
Helpful
1
Replies
4pratik
Beginner

Not able to login using default ip on Sg300-10p switch

I am trying to reuse the SG300 switch and I order to do that I need to reset and reconfigure the switch. I've tried to reset the switch and login in using 192.168.1.254 IP but had no luck at all. Please help if any one has come across the similar issue.

 

Switch Details : SG300-10P

S/N : PSZ170300ZS

 

Let me know if any additional details required to resolve the issue.

 

 

Pratik 

1 ACCEPTED SOLUTION

Accepted Solutions
raluani
Cisco Employee

Hi,
You can try to access via Console and reset the device.

If you need help over WebEx, please open a case and we will help with the reset / recovery.
https://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html

Regards.

View solution in original post

1 REPLY 1
raluani
Cisco Employee

Hi,
You can try to access via Console and reset the device.

If you need help over WebEx, please open a case and we will help with the reset / recovery.
https://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html

Regards.