cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.

2742
Views
5
Helpful
3
Replies
jerivas503
Beginner

Remote Desktop and Cisco RV042 Small Business

With our old Linksys wireless router on Applications issue we can redirect port, for example: 

Remote Desktop access from external pc: 201.85.X.X:1234    (appoint to our public IP and port 1234 )

Whit this we access in the Lan the private 10.1.X.X  WinVista Pro machine terminal services.

I want to forward port  1234  external >>>  3389 Lan . Is possible with RV042 ??

Note: Firmware Version :     v4.1.1.01 (the most recent)

2 ACCEPTED SOLUTIONS

Accepted Solutions
Alejandro Gidi
Beginner

To change ports source/destination you need to use the UPnP feature 

that's what i use on the RV0XX

best luck

View solution in original post

Te-Kai Liu
Rising star

The asymmetric port forwarding config table is available at the Setup>UPnP page. Note that UPnP needs not be enabled (i.e. the UPnP checkbox can remain unchecked) to use the asymmetric port forwarding.

View solution in original post

3 REPLIES 3
Alejandro Gidi
Beginner

To change ports source/destination you need to use the UPnP feature 

that's what i use on the RV0XX

best luck

View solution in original post

Te-Kai Liu
Rising star

The asymmetric port forwarding config table is available at the Setup>UPnP page. Note that UPnP needs not be enabled (i.e. the UPnP checkbox can remain unchecked) to use the asymmetric port forwarding.

View solution in original post

Nice, I'll try UPnp later. Thanks.

------------------

Done, works great. Thanks a lot.