cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 
cancel
2992
Views
5
Helpful
3
Replies

Remote Desktop and Cisco RV042 Small Business

jerivas503
Level 1
Level 1

With our old Linksys wireless router on Applications issue we can redirect port, for example: 

Remote Desktop access from external pc: 201.85.X.X:1234    (appoint to our public IP and port 1234 )

Whit this we access in the Lan the private 10.1.X.X  WinVista Pro machine terminal services.

I want to forward port  1234  external >>>  3389 Lan . Is possible with RV042 ??

Note: Firmware Version :     v4.1.1.01 (the most recent)

2 Accepted Solutions

Accepted Solutions

Alejandro Gidi
Level 1
Level 1

To change ports source/destination you need to use the UPnP feature 

that's what i use on the RV0XX

best luck

View solution in original post

Te-Kai Liu
Level 7
Level 7

The asymmetric port forwarding config table is available at the Setup>UPnP page. Note that UPnP needs not be enabled (i.e. the UPnP checkbox can remain unchecked) to use the asymmetric port forwarding.

View solution in original post

3 Replies 3

Alejandro Gidi
Level 1
Level 1

To change ports source/destination you need to use the UPnP feature 

that's what i use on the RV0XX

best luck

Te-Kai Liu
Level 7
Level 7

The asymmetric port forwarding config table is available at the Setup>UPnP page. Note that UPnP needs not be enabled (i.e. the UPnP checkbox can remain unchecked) to use the asymmetric port forwarding.

Nice, I'll try UPnp later. Thanks.

------------------

Done, works great. Thanks a lot.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: