cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
595
Views
0
Helpful
1
Replies
Highlighted
Beginner

Remote VPN Access to RV082 from ISR

Greetings...

I have a customer that has a Cisco 2900 Series ISR on his Headquarters, and has some branches with RV082s.

We have VPN Client configured on the 2900 ISR Router and we can connect remotely using the VPN Client to the Headquarters (192.168.1.0)  however we can't reach the branches subnets (192.168.2.0, 192.168.3.0, etc.)... we found out that in the RV082 you need to specify the secure traffic as a destination, but in only supports one network (192.168.1.0 or Headquarters in this case), we can't specify the VPN Client pool defined on the ISR so it can reach the incoming VPN Clients...

Is there any way to accomplish this? We need to access the branches subnets when connecting using VPN to the 2900 ISR.

Thanks in advance,,   

Rafael Quiros
iSynerG       

Rafael Quiros iSynerG
1 REPLY 1
Highlighted
Beginner

Anyone please? I need to get this working... Thank you!