09-30-2020 02:12 PM - last edited on 03-09-2022 10:51 PM by smallbusiness
Estimados agradeceré la ayuda sobre el tema, actualice el Firmware del RV160W con la ultima version 1.0.01.1, intento configurar una VPN PPTP y en faltan opciones de configuracion o si intento realizar una VPN Ipsec no logro la comunicación, seguí en esta ultima algunas configuraciones en pdf que están en la web pero continuo con el problema, agradeceré algún instructivo para configurar VPN PPTP e Ipsec con este Firmware que aparentemente es diferente
Tengo otras VPN funcionando pero ninguna con este modelo de router ni version de Firmware. Terminan todos mis intentos en la imagen que adjunto
Muchas gracias
Solved! Go to Solution.
10-01-2020 04:47 AM
Hi Carlos,
Here is a more recent step-by-step configuration for the PPTP on RV series. The following example is for RV34x but both RV340 and RV160 share the same PPTP configuration settings.
Regards,
Martin
10-01-2020 04:16 AM
- Check if this demo-guide can help you :
https://www.youtube.com/watch?v=ICMlmuw-ucg
M.
10-01-2020 04:47 AM
Hi Carlos,
Here is a more recent step-by-step configuration for the PPTP on RV series. The following example is for RV34x but both RV340 and RV160 share the same PPTP configuration settings.
Regards,
Martin
10-03-2020 07:47 AM
Thank you very much Martin, it worked ok
Greetings
Muchas gracias Martin, funicono OK
Saludos
Carlos Sosa
10-03-2020 09:10 AM
You're welcome!
10-06-2020 10:02 AM
Dear Martin, I bother you again, because when I generate connections from Windows 10 or Windows 7, the existing Internet connection is disconnected from where I configure the VPN connection for a minute and then it is impossible to navigate, but strangely I can access one of the terminals within the network that continues to be remotely connected by the VPN in the subnet configured on the VPN server.
Greetings
Carlos Sosa
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide