I have 2 branch offices as follows - both have RV325's
Branch Office 1: RV325 - subnet 192.168.20.0/24
Branch Office 2: RV325 - subnet 192.168.3.0/24 AND 10.2.11.0/24
I can establish IPSEC connections between the 2 branch offices - but only 1 at a time - i can not run both at a time. Example: 192.168.3.0 <-> 192.168.20.0 WORKS - and 192.168.3.0 <-> 10.2.11.0 WORKS - but when i try to configure both tunnels i get an error message.
(192.168.20.0) is conflicting with tunnel 3. Please change it!
Both machines support multiple tunnels - how can we configure multiple subnets through the tunnels.