cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
405
Views
0
Helpful
0
Replies
Highlighted
Beginner

Routing Subnets between RV325 and RV082

Good morning all. I have an interesting situation that I am hoping someone can help me with. More than likely I am being slightly daft and am missing something completely.  I have Router A [Cisco rv325] and Router B [Cisco rv082] in this environment. Router B is connected to the LAN of Router A. 

 

Devices ===(10.10.10.0/24) ===>(LAN) Router B (WAN1) ===(10.1.0.2/24)===>(LAN w/Multiple Other Devices) Router A (WAN) ===> INTENRET

 

Here is the scenario. Devices behind Router B can ping Router A and all the devices on the 10.1.0.0/24 network. Router B can ping Router A HOWEVER it cannot ping any of the other devices attached to the LAN of Router A. I have attempted setting one-to-one NAT on Router B, which didn't work, and I have attempted to set a static route under "Advanced Routing" on Router A, again that didn't work.

 

I have hit a brick wall here, and any suggestions or pointers would be greatly appreciated.

0 REPLIES 0