cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
523
Views
0
Helpful
1
Replies
Highlighted
Beginner

RV016 (V3) tcp and udp outgoing traffic issue

Hi everyone.

I've got a CISCO RV016 connected to a tooway SAT modem and need  to reach another router connected in DSL

I need to make a TCP connection on port 8080 with my audio codec to reach the other side, and get audio.

I do not feel comfortable with all the security process, firewall, forwarding port and so on ...

What do I need to do to make the RV016 let the TCP out ?

do I need to create rules ?  do I need to modify the firewall factory settings ?

does UDP outgoing traffic need some rules too ?

Thank's for your help.

Nicolas.

System Information

Serial Number :  NKS16450006

Firmware Version :  v4.2.1.02 (Jan 18 2012 14:10:55)

PID VID :  RV016 V03

Firmware MD5 Checksum :  a9817f2dbdcbd6a5c109eaa21b1c3545

LAN  Working Mode :  Gateway

1 REPLY 1
Highlighted
Rising star

Hi Nicolas, thank you for using our forum, my name is Johnnatan I am part of the Small business Support community. If you want other method instead forwarding I could advise you One-to-one NAT. I will share a document to you regarding this configuration.

http://www6.nohold.net/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=544

I hope you find this answer useful

“Please rate useful posts so other users can benefit from it”

Greetings, 
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.

“Please rate useful posts so other users can benefit from it” Greetings, Johnnatan Rodriguez Miranda. Cisco Network Support Engineer.