cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1001
Views
0
Helpful
2
Replies

RV042 - Disable Split tunneling

jag_lin84
Level 1
Level 1

Hi all,

I am currently using a RV042 Firewall linked up to another RV042 via Site to Site VPN.

Everything works fine and dandy, however i wish to disable internet access on one of the RV042s.

Is there any way i can disable split tunneling on the RV042 to achieve this? There doesn't seem to be anything i can find on the menus that state that.

Looking forward to some advise here.

Thanks!

1 Accepted Solution

Accepted Solutions

mpyhala
Level 7
Level 7

jag_lin84,

The firewall allows all outbound traffic and blocks all inbound traffic by default. You can create an Access Rule to block all outbound traffic.

Action: Deny

Service: All

Log: -

Source Interface: LAN

Source IP: Any

Destination IP: Any

- Marty

View solution in original post

2 Replies 2

mpyhala
Level 7
Level 7

jag_lin84,

The firewall allows all outbound traffic and blocks all inbound traffic by default. You can create an Access Rule to block all outbound traffic.

Action: Deny

Service: All

Log: -

Source Interface: LAN

Source IP: Any

Destination IP: Any

- Marty

Thanks alot!

Sorry but i miss the obvious sometimes

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: