RV042 MultiSubnet QuickVPN Access

[wendellprincipe]

Hi,

Can I get your help anyone please help me figure out why QuickVPN clients can only reach  RV042's LAN Network and not able to access subnet 1 remotely, however PPTP clients can access both..

Firmware Version :  v4.1.1.01-sp (Dec 6 2011 20:03:18)

Working Mode :  Gateway

Multiple Subnet: Enabled

Device IP Address : 192.168.10.1

LAN: 192.168.10.1/255.255.255.0

Subnet 1: 172.16.10.1/255.255.255.0

1. QuickVPN clients able to reach all the resouces inside 192.168.10.1/24 remotely, but unable to access 172.16.10.1/24 network.
2. Network 192.168.10.1/24 able to communicatie with network 172.16.10.1/24.
3. PPTP clients able to access both subnets remotely.

Thanks

Wendell

[lariasqu]

Hi Wendell, thank you for using our forum, my name is Luis I am part of the Small business Support community. I apologize for this inconvenience, I advise you to check this document in order to compare your configuration with this information,

https://supportforums.cisco.com/docs/DOC-29399

Here you will see some advises to configure your QuickVPN,

I hope you find this answer useful

Greetings,

Luis Arias.

Cisco Network Support Engineer.