cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1934
Views
0
Helpful
4
Replies
Highlighted
Beginner

RV042 port forwarding issue

I have a RV042 using (for now), just the single WAN interface. I am trying to forward all packets to port 9000 from the WAN to a single IP address on the network.  I've set up both forwarding rules under Setup -> Forwarding and under the Firewall -> Access Rules.

I cannot connect to my device from the outside world, however.  Is there something I'm missing?

4 REPLIES 4
Highlighted
Beginner

Scott,

Can you please let me know if you are able to access the device via the local Lan IP Address with the required port number? Also, can you please let me know what firmware version you are running on the device?

Thanks,

Blake Mereby

Highlighted

I can connect locally no problems at all

Firmware Version: v4.0.2.08-tm

Highlighted

FIxed.

Problem was upstream. Router above was set to put the RV04 in the DMZ, but the config didn't stick. Re configured that router and now it works...

Thanks.

Highlighted

Thank you for the update.

Thanks,

Blake Mereby