Hello,
what do I wrong?
I have a RV110W (1.2.0.10) and will send SNMP to a linux-server. But the only thing I receive is after a warmstart:
2014-01-08 10:11:21 router.local [192.168.100.1] (via UDP: [192.168.100.1]:32770->[192.168.100.9]:162) TRAP, SNMP v1, community public
SNMPv2-SMI::enterprises.3.1.1 Warm Start Trap (0) Uptime: 0:00:00.01
2014-01-08 10:11:22 router.local [192.168.100.1] (via UDP: [192.168.100.1]:32770->[192.168.100.9]:162) TRAP, SNMP v1, community public
SNMPv2-SMI::enterprises.3.1.1 Link Up Trap (0) Uptime: 0:00:00.01
IF-MIB::ifIndex.10 = INTEGER: 1 IF-MIB::ifAdminStatus.10 = INTEGER: up(1) IF-MIB::ifOperStatus.10 = INTEGER: up(1)
2014-01-08 10:11:22 router.local [192.168.100.1] (via UDP: [192.168.100.1]:32770->[192.168.100.9]:162) TRAP, SNMP v1, community public
SNMPv2-SMI::enterprises.3.1.1 Link Up Trap (0) Uptime: 0:00:00.01
IF-MIB::ifIndex.1 = INTEGER: 1 IF-MIB::ifAdminStatus.1 = INTEGER: up(1) IF-MIB::ifOperStatus.1 = INTEGER: up(1)
Greets
