RV110W - VPN peerid is allways ip (dynamic)

[randy.sieber]

we have the rv110w router, and try to connect to our juniper netscreen firewall.

the rv110w is on adsl line with dynamic ip

the juniper has fixed ip

the problem is, the cisco router allways sends as id the ip of the wan connection.

this is bad, because it is changing every 24hours, and we have to set new ip to juniper firewall every time.

we are using agressive mode.

lan-to-lan mode

we get on our juniper:

Receive Id in AG mode, id-type=1, id=79.193.53.57

where can we set the id to something like "my.router.name" ??

[Johnnatan_Rodriguez_Miranda]

Good morning  Randy Sieber

Thanks for using our forum

The problem seems to be the dynamic IP, in order to resolve this ask your ISL a static IP address

I hope you find this answer useful, if it was satisfactory  for you, please mark the question as Answered.

[Tom Watts]

Hello Randy, you may use 3rd party services such as dyndns to accomplish this.

-Tom
Please rate helpful posts