cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.
Get the latest news in this issue of the Cisco Small Business Monthly Newsletter

394
Views
0
Helpful
17
Replies
Highlighted

RV130W port forwarding works only on VLAN 1 (default)

After 2 days of testing and switching firmware including the latest 2: 1.0.3.52 & 1.0.3.54, i cannot get port forwarding to work on an additional VLAN like my VLAN 10 (a /26 subnet).

Port forwarding only works if the internal destination is on VLAN 1.

 

Anyone else encountered this?

Thank you

17 REPLIES 17
Highlighted
VIP Mentor

Re: RV130W port forwarding works only on VLAN 1 (default)

Not sure if understand your requirement, port-forward should work any VLAN inside, please provide more screenshot to understand

 

here is configuration guide for reference :

 

https://www.cisco.com/c/en/us/support/docs/smb/routers/cisco-rv-series-small-business-routers/smb4994-port-forwarding-on-the-rv130-and-rv130w.html

BB
*** Rate All Helpful Responses ***
Highlighted

Re: RV130W port forwarding works only on VLAN 1 (default)

Hi,

i've added the screenshot.

 

So port forwarding to VLAN 10 (10.10.10.128/26) does not work

Port forwarding to VLAN 1 (default) 10.10.10.0/26 works

 

For clarification, i'm talking about accessing intranet host from internet.

Highlighted
VIP Mentor

Re: RV130W port forwarding works only on VLAN 1 (default)

Sure i can undertand out side to inside

 

can you post VLAN information screen shot also

BB
*** Rate All Helpful Responses ***
Highlighted

Re: RV130W port forwarding works only on VLAN 1 (default)

Hi Balaji,

Added screenshot

 

also before you ask, inter-vlan routing is enabled.

Thank you.

Highlighted
VIP Mentor

Re: RV130W port forwarding works only on VLAN 1 (default)

high level your config seems to be ok. last but not the least.

 

Couple of test to confirm :

 

1. Internally from VLAN 1 IP to VLAN 10 IP you were port-fording working ? YES / NO

2. The One Port-forward from Internet to LAN(VLAN 10), can you post output of  ipconfig/all (if windows ?) also netstat -na

BB
*** Rate All Helpful Responses ***
Highlighted

Re: RV130W port forwarding works only on VLAN 1 (default)

Hi,

 

At Question 1: i did not do this. I am forwarding :

 WAN to VLAN10 fails

WAN to VLAN 1 works

 

At question2:

 

PS C:\Users> ipconfig

Windows IP Configuration


Ethernet adapter Ethernet:

Connection-specific DNS Suffix . :
Site-local IPv6 Address . . . . . : fec0::d82c:683a:f4e9:f8d1%1
Link-local IPv6 Address . . . . . : fe80::d82c:683a:f4e9:f8d1%2
IPv4 Address. . . . . . . . . . . : 10.10.10.140
Subnet Mask . . . . . . . . . . . : 255.255.255.192
Default Gateway . . . . . . . . . : fe80::d6ad:71ff:fe5c:3f3f%2
10.10.10.129

Tunnel adapter isatap.{72BB650E-67FA-4B3C-B78B-AB13201CAF36}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

 

______________________________________________________________________________________________


Ethernet adapter Ethernet:

Connection-specific DNS Suffix . :
Site-local IPv6 Address . . . . . : fec0::5c2b:6e85:6aea:29f9%1
Link-local IPv6 Address . . . . . : fe80::5c2b:6e85:6aea:29f9%13
IPv4 Address. . . . . . . . . . . : 10.10.10.133
Subnet Mask . . . . . . . . . . . : 255.255.255.192
Default Gateway . . . . . . . . . : fe80::d6ad:71ff:fe5c:3f3f%13
10.10.10.129

 

----------------------------------------------------------------------------------------------

 


Ethernet adapter Ethernet:

Connection-specific DNS Suffix . :
Site-local IPv6 Address . . . . . : fec0::d0af:204a:7330:7992%1
Link-local IPv6 Address . . . . . : fe80::d0af:204a:7330:7992%10
IPv4 Address. . . . . . . . . . . : 10.10.10.2
Subnet Mask . . . . . . . . . . . : 255.255.255.192
Default Gateway . . . . . . . . . : 10.10.10.1

 

Highlighted

Re: RV130W port forwarding works only on VLAN 1 (default)

idk why my last reply is not showing up.... posting again

 

1. Internally from VLAN 1 IP to VLAN 10 IP you were port-fording working ? YES / NO

- i only tested like this:

--- WAN to VLAN 10, this fails

---WAN to VLAN 1, this works

2. The One Port-forward from Internet to LAN(VLAN 10), can you post output of  ipconfig/all (if windows ?) also netstat -na

---i've attatched a txt file

Highlighted
VIP Mentor

Re: RV130W port forwarding works only on VLAN 1 (default)

ok i would like to test below one and confirm server side ok as per the config i do not see any issue here.

 

1. Internally from VLAN 1 IP to VLAN 10 IP you were port-fording working ? YES / NO

 

Try from 10.10.10.0/26 IP range any IP to try to connect what ever port you like to forward ( as per message you like to do 3389)

 

10.10.10.133 3389 and confirm  is this works ?

 

BB
*** Rate All Helpful Responses ***
Highlighted

Re: RV130W port forwarding works only on VLAN 1 (default)

everything works between the internal VLANs

you can see in the netstat from 10.10.10.2:

 

TCP 10.10.10.2:57583 10.10.10.140:3389

vlan1 host RDP on 3389 to VLAN 10 host.

this works, so i dont need internal forwarding because internal routing between vlans does this for all ports automatically

 

My problem is reaching a host from the outside (internet/WAN) as source

 

Highlighted
VIP Mentor

Re: RV130W port forwarding works only on VLAN 1 (default)

Since i take as confirmation from VLAN1 to VLAN 10 RDP working.

 

Try reboot the device after configuring port-forward , save  and reboot and let  us know if that works. 

BB
*** Rate All Helpful Responses ***
Highlighted

Re: RV130W port forwarding works only on VLAN 1 (default)

sadly that does not make any difference, i've rebooted dozens of times, factory reset 3 times ....

it only forwards to hosts on VLAN 1 and no external access to hosts on other vlans.

Highlighted
VIP Mentor

Re: RV130W port forwarding works only on VLAN 1 (default)

Just to confirm make sure NAT working, try one to one NAT and test ?

 

If you have rights on the PC/ Server - install wireshark and check are you able to get any request coming in ?

 

Can you also post your outbound NAT rule screenshot

 

EDIT : not sure this could have issue here :

 

the one working config of as below :

 

IPv4 Address. . . . . . . . . . . : 10.10.10.2
Subnet Mask . . . . . . . . . . . : 255.255.255.192
Default Gateway . . . . . . . . . : 10.10.10.1

 

The one not working :  ( Can you disable IPv6 here) and test other i was thinking 

 

IPv4 Address. . . . . . . . . . . : 10.10.10.133
Subnet Mask . . . . . . . . . . . : 255.255.255.192
Default Gateway . . . . . . . . . : fe80::d6ad:71ff:fe5c:3f3f%13
10.10.10.129

BB
*** Rate All Helpful Responses ***
Highlighted

Re: RV130W port forwarding works only on VLAN 1 (default)

i dont know what outbound NAT config is.

The only NAT options i see in the management interface of the router is the one-to--one NAT, where you need a static public IP.

I have a dynamic public IP

Highlighted
VIP Mentor

Re: RV130W port forwarding works only on VLAN 1 (default)

Try the one option i have suggested for I

1 Pv6 disable, - is that works ?

2. from VLAN are you able to access Internet outgoing ?

3. can you post Access Rules screenshot ?

 

BB
*** Rate All Helpful Responses ***