Hi,
We are currently using the RV180 to NAT hosting VM servers on various platforms. DNAT seems to be working fine but in setting up a NAT out does not.
scenario:
Internal IPs : 10.1.1.x/24
WAN NIC : 64.111.111.245/24
VMs : 10.1.1.x/24
Main VM Host : 10.1.1.35 (vSwitch01) on NIC001
WinSrv 2008 : 10.1.1.32
WinSrv 2015 : 10.1.1.29
CentOS : 10.1.1.99
Public IPs : 64.111.111.x/24 (ie.)
DNAT : 10.1.1.99 ---> 64.111.111.223
DNAT : 10.1.1.32 ---> 64.111.111.224
DNAT : 10.1.1.29 ---> 64.111.111.247
All outbound traffic is being tagged as 64.235.106.245. How can we set a static outbound NAT from internal IP to External?
The RV180 does not appear to have a selection of SNAT like what is shown in the documents for setting this up.
Software Firmware version: 1.0.5.4
For the purpose of licensing software and SMTP traffic we need to have the proper IP NATing from the local IP to the assigned to it's paired public IP address.
__
Jim Evans
ICT Tech Support
