Rv180w and rv042 IPsec VPN tunnel windows file sharing
I have two locations one running a cisco rv180w and the other running a cisco rv042. I have an IPsec tunnle between both locations.
Each location can ping each other and the rv042 location is able to access windows share from the rv180w location. Howerver, the rv180w location is not able to access shares on the rv042 location.
I tried access the share by IP and by name after editing the host file with no luck.
Windows firewall is disabled on both locations.
Also when I do a port scan of a windows box from the rv180w location to the rv042 location all the ports are blocked but when i do a port scan from the rv042 location to the rv180w location 135,39,445 are open. When i do a scan from the internal network of rv042 the ports are open.
QuestionDear All,I'm currently looking for firmware version 220.127.116.11 for Linksys SPA400 Analog Telephony Gateway. Unfortunately, my device was bricked and I was able to recover it using a recovery tool and recovery firmware version 18.104.22.168 but can't find v...
Change in ASD Automatic Software Download Feature
Dec 13th, 2019
Cisco RV160, 260, 340, and 345 Series Routers
Due to an API change in Cisco’s software download platform the Automatic Download Feature (ASD) on RV series routers will be temporarily ...
SFP Module Support List for RV160x and RV260x Devices
Small form-factor pluggable (SFP) ports are included on the RV160 and 260 routers to allow the use of optical SFP transceiver modules. SFP’s convert the optical signals to electrical signals. SFP’s al...
Welcome and thanks for visiting the Small Business Community Newsletter. This is our first of what we will make a monthly newsletter where you will be provided information on New products and trends, What’s ...