RV180W Guest Access

[calweaver]

I am new to this router and am having issues creating a guest network. What I'm trying to do is create 2 wireless networks, 1 for business and 1 for guest access that is separated from the business network. Can I do this with just using this router and no other access points?                

[aunrein]

Hello Calvin,

I believe this article should help you with your router configuration.

http://www6.nohold.net/CiscoSB/Loginr.aspx?login=1&pid=4&app=search&vw=1&articleid=2877

Let me know if this works!

Alex

[calweaver]

Thanks for the reply Alex. I have no issues setting up the wireless connections. I just need to separate the wireless networks. Any ideas on how to do that?

[aunrein]

Hi again,

I believe that if you configure one SSID for business and one SSID for guests you accomplish what you want. If you want a little more seperation of the guest and business networks, you can create a business VLAN and a guest VLAN then assign each of those VLANs to their own SSID.

Let me know if this works!

Alex

[jonatrod]

Good morning.

Hi Calvin Weaver, this router supports multiple Service Set Identifiers (SSIDs) and  up to 4 separate virtual networks, so, you can configure differents VLANs (¨Guest¨ and ¨Management¨) and order to configure your device please follow this steps:

http://www6.nohold.net/CiscoSB/Loginr.aspx?login=1&pid=4&app=search&vw=1&articleid=2152

Also you can create 2 different SSID, in order to configure them, use the Alexander´s link.

Thanks

I hope you find this answer useful, if it was satisfactory for you, please mark the question as Answered and rate the correct answer.

Best regards,

Johnnatan Rodriguez Miranda.

Cisco network support engineer.