rv180w inter vlan routing

[Balma1969]

Hi,

I have a rv180w with 2 vlan configured, vlan 1 and vlan 4, both with inter vlan routing disabled. So from vlan 4 is not possible to ping a device in vlan 1. I need to open inter vlan routing just from a single IP in vlan 4 to a single IP in vlan 1. 

In the firewall is not possible to add an access rule from LAN to LAN (vlan to vlan).

How can I open an   inter vlan routing just from a sinle IP in vlan 4 to a single IP in vlan 1 ?

[Dennis Mink]

you would need to work with access lists, intervlan routing would open it up between all hosts in both VLANS and then apply access lists between the two on incoming traffic. I am not sure if the rv180w is capable of doing that, so I suspect you would need to add a firewall to restrict traffic between the two.

PLease rate if useful