I have an RV215W router, a PPTP VPN server is configured. The network behind the router is 192.168.1.0/24. When user's connect to the VPN, they do not get a gateway. I have configured the address range of the VPN connection as 10.0.0.0/24 and as 192.168.1.0/24. I really want to use the 10.0.0.0/24 for the VPN connections, as I do not want to conflict with most home networks. How do I get it to assign a gateway, so I can route all traffic across the VPN connection?
QuestionDear All,I'm currently looking for firmware version 188.8.131.52 for Linksys SPA400 Analog Telephony Gateway. Unfortunately, my device was bricked and I was able to recover it using a recovery tool and recovery firmware version 184.108.40.206 but can't find v...
Change in ASD Automatic Software Download Feature
Dec 13th, 2019
Cisco RV160, 260, 340, and 345 Series Routers
Due to an API change in Cisco’s software download platform the Automatic Download Feature (ASD) on RV series routers will be temporarily ...
SFP Module Support List for RV160x and RV260x Devices
Small form-factor pluggable (SFP) ports are included on the RV160 and 260 routers to allow the use of optical SFP transceiver modules. SFP’s convert the optical signals to electrical signals. SFP’s al...
Welcome and thanks for visiting the Small Business Community Newsletter. This is our first of what we will make a monthly newsletter where you will be provided information on New products and trends, What’s ...