cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.
Get the latest news in this issue of the Cisco Small Business Monthly Newsletter

1516
Views
0
Helpful
3
Replies
Highlighted
Beginner

RV220W as a dhcp relay agent

I'm trying to configure a RV220W as a dhcp relay agent for multiple vlans.  vlan 1 has the addresses 192.168.1.0/24 gateway 192.168.1.1 and vlan 21 has the addresses 192.168.21.0/24 gateway 192.168.21.1.  I have a windows 2008 R2 dhcp server at 192.168.1.5 with scopes of 192.168.1.1 to 254 and 192.168.21.1 to 254.  Vlan 1 works fine with dhcp set to NONE.  I have vlan 21 set to "DHCP Relay". and the "relay gateway" for vlan 21 set to 192.168.21.1, 192.168.1.1 or 192.168.1.5 and none seem to work.  Anything that has a static IP in 21 can communicate with vlan1 and vice versa.

Anyone have any ideas?

Thanks,

Greg

3 REPLIES 3
Highlighted
Rising star

By now you might have realized that the firmware release note has mentioned a known issue with DHCP Relay.

Highlighted

Yes, but it says problems with dhcp relay from the WAN.  I'm doing it from the LAN

side.

Highlighted

It appears that an update to the firmware release notes is needed. There is indeed a problem in supporting your scenario.