RV220W as a dhcp relay agent

[lozanogj1]

I'm trying to configure a RV220W as a dhcp relay agent for multiple vlans.  vlan 1 has the addresses 192.168.1.0/24 gateway 192.168.1.1 and vlan 21 has the addresses 192.168.21.0/24 gateway 192.168.21.1.  I have a windows 2008 R2 dhcp server at 192.168.1.5 with scopes of 192.168.1.1 to 254 and 192.168.21.1 to 254.  Vlan 1 works fine with dhcp set to NONE.  I have vlan 21 set to "DHCP Relay". and the "relay gateway" for vlan 21 set to 192.168.21.1, 192.168.1.1 or 192.168.1.5 and none seem to work.  Anything that has a static IP in 21 can communicate with vlan1 and vice versa.

Anyone have any ideas?

Thanks,

Greg

[Te-Kai Liu]

By now you might have realized that the firmware release note has mentioned a known issue with DHCP Relay.

[lozanogj1]

Yes, but it says problems with dhcp relay from the WAN.  I'm doing it from the LAN

side.

[Te-Kai Liu]

It appears that an update to the firmware release notes is needed. There is indeed a problem in supporting your scenario.