Hello Guys
Error message appears during the SSL VPN thin client installation.
I got a pop-up containing the following message:
Error: The modem (or other connecting device) has reported an error.
Does anyone have a clue how to solve this issue??
In the windows event viewer there are the following tree messages:
1st message:
CoId={12AF2975-19BB-4219-A007-C810160B9604}: The user EU\xxxx has started dialing a Dial-up connection using a all-user connection profile named VirtualPassage. The connection settings are:
Dial-in User =
VpnStrategy =Not Applicable
DataEncryption = None
PrerequisiteEntry =
AutoLogon = No
UseRasCredentials = Yes
Authentication Type = PAP/CHAP/MS-CHAPv2
Ipv4DefaultGateway = No
Ipv4AddressAssignment = By Server
Ipv4DNSServerAssignment = By Server
Ipv6DefaultGateway = No
Ipv6AddressAssignment = By Server
Ipv6DNSServerAssignment = By Server
IpDnsFlags =
IpNBTEnabled = Yes
UseFlags = Private Connection
ConnectOnWinlogon = No.
2nd message is:
CoId={12AF2975-19BB-4219-A007-C810160B9604}: The user EU\xxxx is trying to establish a link to the Remote Access Server for the connection named VirtualPassage using the following device:
Server address/Phone Number = 0
Device = Virtual Passage SSLDrv Adapter
Port = ISDN26-0
MediaType = ISDN.
and finally the error - 3rd message:
CoId={12AF2975-19BB-4219-A007-C810160B9604}: The user EU\xxxx dialed a connection named VirtualPassage which has failed. The error code returned on failure is 651.
