cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
481
Views
0
Helpful
1
Replies

RV220W iphone cant access exchange via 802.11

Brook Powers
Beginner
Beginner

My environment consists of Comcast cable internet with 5 static IP's.

I have a MSFT SBS 2003 server with Exchange with a static IP of 192.168.36.10

Wireless notebooks are able to work and surf with no issues.

Wired LAN clients have no issues.

iPhones are unable to send and receive email only when connected to the RV220W's wireless. When connected via the cellular carrier, using the same settings, they work fine.

The iPhone is getting the following info via DHCP and Wireless Isolation is DISABLED;

IP 192.168.36.103

SM 255.255.255.0

DNS 192.168.36.10

The exchange server is set to allow connections and relay from 192.168.36.1/255.255.255.0

Any ideas?

1 Reply 1

lariasqu
Beginner
Beginner

Hi Brook, thank you for using our forum, my name is Luis I am part of the Small business Support community.

I apologize for your inconvenience, will be a pleasure the help you with your configuration, in this case you could configure an access list from to allow the traffic from port 25 to your desired WVlan, you could check this article from Guide me, Access Rules Configuration on RV120W and RV220W

I hope you find this answer useful

Greetings,

Luis Arias.

Cisco Network Support Engineer.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers