cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.

521
Views
0
Helpful
0
Replies
ice9
Beginner

RV320 - routing problem, two gates

Hello,

i have a problem with network based on two gates.

 

Gate 1 is a ISP router with DHCP and access to internet, IP of device: 192.168.0.1/24

Gate 2 is a another ISP access modem connecting directly to VPN of my company, IP of device: 192.168.225.30/27 (vpn subnet 192.168.0.0/16)

 

Idea is to connect devices from subnet 192.168.225.0/27 to reach internet access through gate 1 but also through gate 2 to vpn subnet 192.168.0.0/16 if necessary.

 

I set 192.168.225.1 on RV320 LAN interface.

 

I assume, i should connect Gate1 to WAN1 and Gate 2 to LAN port, and next set up a static route 192.168.0.0 255.255.0.0 through 192.168.225.30 ?

Advanced Routing - Working mode should be set for Router or Gateway ?

 

 

 

 

0 REPLIES 0