06-03-2018 01:33 AM - edited 03-21-2019 11:10 AM
Hy,
I have bought a Cisco rv325 and i have some Problem to configure it.
What i would like :)
-6 vlan which can communicate with each others,
-2 wans with Failover
In the wan 1 ( the Main) :
-i have my Provider fiber box ( Ip address of the fiber box : 192.168.1.1/24)
-ip address of my wan 1 : 192.168.1.254/24
-configuration of my fiber box:
static ip for my wan1
no dmz but I inform each port for nat/pat
In the wan 2 ( the Rescue) :
-i have a 4g box ( Ip address of the one : 10.0.0.1/24)
-ip address of my wan 2 : 10.0.0.254/24
-configuration of my 4G fiber:
static ip for my wan2
no dmz but I inform each port for nat/pat
is it better to put each wan in DMZ in Respective Box?
I think what I want is some basic thing, but i don't be enought good to do something works :p
Hope someone can help me, i try since 2 weeks :(
Here Screenshots of my Configuration :
Solved! Go to Solution.
06-03-2018 06:56 AM
Hi,
My name is Iliya Gatsev from Cisco Technical Support Team.
No worries, just call us tomorrow and we are going to offer you support in French language.
https://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html
Please rate this post or marked as answered to help other Cisco customers.
Iliya Gatsev
Cisco STAC Network Engineer
Together we are the human network .:|:.:|:. CISCO
06-03-2018 06:56 AM
Hi,
My name is Iliya Gatsev from Cisco Technical Support Team.
No worries, just call us tomorrow and we are going to offer you support in French language.
https://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html
Please rate this post or marked as answered to help other Cisco customers.
Iliya Gatsev
Cisco STAC Network Engineer
Together we are the human network .:|:.:|:. CISCO
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide