04-17-2018 04:43 PM - edited 03-21-2019 11:08 AM
We have a RV325 (192.168.63.1) router behind our TP-Link router (192.168.0.1), in a pretty simple setup.
RV325 is also the DHCP server. Everything works great except that no device in 192.168.63.0/24 is accessible from outside (Internet). We forwarded all ports that we needed from TP-LINK to RV325, but looks like RV325 is not forwarding any ports to other IPs (192.168.63.2 for example)
For this example, we did a PAT the TCP port 3000 to 192.168.63.2 81 and ran a nmap scan from an external machine:
Nmap scan report for XXXXXXX (XXXXXXXXX) Host is up (0.22s latency). PORT STATE SERVICE 3000/tcp closed ppp
TP-Link is certainly not the problem since if we enable PPTP in RV325, it will show the 1723/tcp open
Here is our PAT settings:
We tried to set firewall permissive access rules or even disable the firewall but to no avail.
Running RV325 on latest firmware, can ping 192.168.63.2 just fine. We just did a factory reset.
Can anyone shed a light?
Firmware Version: | v1.4.2.17 (2017-10-30, 15:50:18) |
12-02-2019 05:46 PM
12-04-2019 05:37 AM
My unit was faulty. I bought an used Fortigate router and it worked flawlessly. We retired our Cisco RV325.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: