Help.....
Can’t Access equipment on Vlan 1 from Vlan 20
Case:
Cisco RV325 Router (newest firmware)
Vlan 1 192.168.1.0/24 DHCP
Vlan 20 192.168.2.0/24 DHCP
Equipment:
Asus AP 192.168.1.16 Static IP Connected to Port 1
Default GW 192.168.1.1
Synology NAS 192.168.1.15 Static IP Connected to Port 2
Default GW 192.168.1.1
I did this:
Started with factory defaults:
Created Vlan 20 and checked that DHCP is 192.168.2.1/24
Enabled Inter Vlan routing on both Vlans
Untagged Port 08-09-10-11 to Vlan 20.
Untagged the rest of the ports to Vlan 1 (was default)
Connect my pc to Vlan 20 on Port 08 and got IP 192.168.2.100 from DHCP.
But I can’t Ping or access AP nor NAS on Vlan 1.
But this all works perfectly on my Cisco router RV130 ???
