cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Get the latest new and information the November issue of the Cisco Small Business Monthly Newsletter

331
Views
0
Helpful
3
Replies

RV325 - VPN does not work anymore after first restart

Hello,

 

I have reconfigured the router many times and everything works fine until first reboot. VPN is no longer working no matter what I am trying.

Error in log is: Tunnel Authorize Fail - no connection has been authorized with  policy=AGGRESSIVE+XAUTHPSK+XAUTHSERVER

VPN is configured as EasyVPN with full tunnel.

 

If I do factory default and configure again, VPN works again until first reboot.

 

Firmware version is 1.4.2.22

 

Any idea?

 

Many thanks.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: RV325 - VPN does not work anymore after first restart

Hi all,

 

I have no contract for support, therefore I got no help.

Anyhow, I have downgrade the firmware to 1.2.1.14 and evrything works fine. I can connect to VPN after the restart, I have checked also with IPhone.

Firmware version 1.3.2.02 does not work either. I do not know if one of the version 1.4.x.x will work, but I will not try anymore.

 

Solution: Downgrade to 1.2.1.14 if you want EasyVPN to work.

 

Thanks

View solution in original post

3 REPLIES 3
VIP Advisor

Re: RV325 - VPN does not work anymore after first restart

looks odd as per the description you have mentioned here.

 

please do contact SMB support, they can investigate for you.

 

https://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html

BB
*** Rate All Helpful Responses ***

Re: RV325 - VPN does not work anymore after first restart

Thanks for hint.
If I force another save on WAN1 then I can have VPN for 10-15 seconds. No VPN connection after that.
Could be related with "Connected(Inactive)" state of WAN1?

Thanks.

Re: RV325 - VPN does not work anymore after first restart

Hi all,

 

I have no contract for support, therefore I got no help.

Anyhow, I have downgrade the firmware to 1.2.1.14 and evrything works fine. I can connect to VPN after the restart, I have checked also with IPhone.

Firmware version 1.3.2.02 does not work either. I do not know if one of the version 1.4.x.x will work, but I will not try anymore.

 

Solution: Downgrade to 1.2.1.14 if you want EasyVPN to work.

 

Thanks

View solution in original post