cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1379
Views
10
Helpful
6
Replies
Highlighted

RV340 - SSL VPN Error

 

HI. I can establish SSL VPN connection for my RV340.

 

I get the following errors. 

Anyone would can help me?

 

2019-10-18T09:19:44+01:00 <error>log_sslvpnac: facility=SslVpn;msg=ERROR sslserver.c.989[743FF470] sslsever_send_data: Error: Incomplete write, -1 of 471 bytes written;

 

2019-10-18T09:19:40+01:00 <error>log_sslvpnac: facility=SslVpn;msg=ERROR sslserver.c.2370[704B7470] connection_thread: Error accepting SSL connection;

 

2019-10-18T09:19:40+01:00 <error>log_sslvpnac: facility=SslVpn;msg=ERROR sslserver.c.3146[704B7470] nonblocking_ssl_accept: Peer closed connection during SSL handshake,status:0;

 

2019-10-18T09:19:36+01:00 <error>log_sslvpnac: facility=SslVpn;msg=DEBUG sslvpn_aaa_stubs.c.105[743FF470] sbtg_authorize: ret 0.;

6 REPLIES 6
Highlighted
Cisco Employee

Do you use the Cisco Anyconnect Client ?

Highlighted

Yes, We use the Any connect client version 3.1.00495
Highlighted

I need to check, but I believe you need to be on version 4.

Jo

Highlighted

Honestly, these failed VPN connection attempts have NO binding to Cisco AnyConnect SW. Sorry Cisco guys, but tell me a reason or evidence what do you have for this opinion.

Based on firewall logs, I can see hundreds of similar attempts per month in times when evidently no VPN connection was initiated from my side. Also, the frequency of these attempts (5-10 within a few seconds) leads to the conclusion that these attempts are 3rd party common scan. As the firewall doesn't log directly the source IP addresses, I can only speculate, that a "number" in brackets is a HEX representation of DEC IP addresses (YY.YY.YY.YY HEX -> XXX.XXX.XXX.XXX DEC). If so, these IP address sources are from China (China Unicom, etc.).

Highlighted

I assume in your case somebody tries to connect to your router.

 

In the case below the SSL VPN feature on the RV340 when enabled allows connection from a client using Cisco Anyconnect Secure Mobility Client. That is the only function it has. Martin asks for help how to make that work.

I understand he tries to connect from his client and gets an error in the RV340.

 

https://community.cisco.com/t5/small-business-technical/tkb-p/4151-docs-small-business-tech-docs

 

Best

Jo

Highlighted

Looking at the documents you reference here, I cannot find where you address the specific errors mentioned in this thread.  

Any help with these error messages?  I have 2 VPN clients and we keep losing connection.  I believe these errors are related to this and need help diagnosing them.