cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Announcement“Cisco Design Thinking Workshop”. Cisco Small Business is excited to invite its Silicon Valley customers to an exclusive interactive one-day session between customers and product Managers.  If you are interested in this exclusive workshop, please fill out the Registration Form. For more information, please check out our FAQ


Get the latest new and information the November issue of the Cisco Small Business Monthly Newsletter

113
Views
0
Helpful
2
Replies
Beginner

RV340 - VPN Problem

We have to create a VPN Site to Site Connection on our RV340.

 

Our Local Net is 192.168.1.0/24

Our Serviceprovider uses the Net 192.168.100.0/24 but wants us to identify us under 192.168.183.0/24  for VPN Traffic

 

Can this be set up in the Router?

 

Static NAT did not help.

Everyone's tags (1)
2 REPLIES 2
Highlighted
VIP Advisor

Re: RV340 - VPN Problem

if the Service provider looking you're to send as a source of 192.168.183.0/24 then you need 192.168.1.0/24 NAT with suggestion pool IP address.

 

here is the static NAT :

 

https://www.cisco.com/c/en/us/support/docs/smb/routers/cisco-rv-series-small-business-routers/smb5461-configure-the-static-network-address-translation-nat-on-the.html

 

I have also read the nat not working..please show us what is wrong.

BB
*** Rate All Helpful Responses ***
Beginner

Re: RV340 - VPN Problem

I'd need the Static NAT only for VPN Tunnel. 

 

f.E. like this:

 

https://documentation.meraki.com/MX/Site-to-site_VPN/Using_Site-to-site_VPN_Translation

 

I think this is not a feature on the RV 340