cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.
Get the latest news in this issue of the Cisco Small Business Monthly Newsletter

174
Views
0
Helpful
0
Replies
Beginner

RV345 multiple IPs on WAN1 via WAN1.1 1.2 etc... port forwarding problems

I have turned off the firewall to eliminate that as a culprit and set the appropriate port forwarding rules using WAN1.1 as the interface instead of WAN1.  If I set it to WAN1, I can reach the local server on public ip .57, if I set it to WAN1.1 I can't reach it on .58 using the same internal ip.  Any suggestions?

 

 

My config is as follows:

WAN1

Static IP: x.x.x.57

Subnet: 255.255.255.248

GW: x.x.x.62

 

WAN1.1

Static IP x.x.x.58

Subnet: 255.255.255.248

GW: x.x.x.62

 

WAN1.2

Static IP x.x.x.59

Subnet: 255.255.255.248

GW: x.x.x.62

 

WAN1.3

Static IP x.x.x.60

Subnet: 255.255.255.248

GW: x.x.x.62