RV345 Static DHCP not working on v1.0.02.16

[mikael.gidmark@slowdays.org]

Hello

I'm trying to add an entry to the static DHCP table (which is empty), but the mac never seems to be valid. I've tried with multiple (valid) MACs, and removing the dashes and lower vs upper casing. But i still get the red outline on the textbox.

For debugging purposes i get "ng-invalid ng-valid-maxlength ng-valid-grid-invalid ng-touched ng-dirty ng-valid-parse ng-valid-required ng-invalid-mac-address" as a css class on the actual textbox

[luis_cordova]

HI mikael.gidmark@slowdays.org ,

Could you share a screenshot of what was done and the error indicated?

Regards

[mikael.gidmark@slowdays.org]

As you can see the mac is red and the apply button is disabled. Of course i use a correct mac adress and switched it out with 1s

[networkcheff]

Try checking with any different IP pool also use the right MAC address of the PC

[mikael.gidmark@slowdays.org]

What do you mean with different IP pool? I've tested with several IPs, and MAC addresses

[luis_cordova · Accepted solution]

Hi mikael.gidmark@slowdays.org ,

Try separating the values ​​of the MAC address with=   :

With this, it should be ok

Regards

[mikael.gidmark@slowdays.org]

Thank you!