12-28-2012 06:39 AM
Hello,
I have firmware version 2.0.2.7. I've down loaded the firmware upgrade utility ver 1.3, and do not see a read me or help file. I've disconnected the cables as directed, but recive a 'broadcast error' and a 'browse device error' What is causing this?
Curtis
Solved! Go to Solution.
12-28-2012 07:35 AM
Hi Curtis, the firmware upgrade should be done through the GUI of the RVS4000. If you're able to log in to the device, the upgrade is under admin -> firmware upgrade, then just browse the file and upload it.
-Tom
Please mark answered for helpful posts
12-28-2012 07:35 AM
Hi Curtis, the firmware upgrade should be done through the GUI of the RVS4000. If you're able to log in to the device, the upgrade is under admin -> firmware upgrade, then just browse the file and upload it.
-Tom
Please mark answered for helpful posts
12-28-2012 07:50 AM
That did it!!!
Do not understand why the prevoius posts had recommended using the firmware upgarde utility.
Curtis
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: