cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.

998
Views
0
Helpful
1
Replies
ekatulski
Beginner

RVS4000 to WRV200 VPN over DSL

I have tried to configure this and get the same error message - no corresponding tunnel on remote side.  I have a wrv200 at home and a RVS4000 at work and am trying to configure a VPN tunnel from home to work.  Both are DSL connected.  Any help in getting this configured would be great, I have been working at this for a while to no avail.  Thansk in advance for any light/help you can shed on this problem.  FYI  I have setup the VPN identical on both routers using the same preshared key and such.  ???

Thanks - Ed

1 ACCEPTED SOLUTION

Accepted Solutions
jbattist
Beginner

Ed,

     Can you post your configurations from each router?  The configuration on each router has to be unique to the routers environment.  If you post the configs, we can just verify they are set up properly.  Change the public IP address if you are concerned about posting your IP here.  Thanks.

View solution in original post

1 REPLY 1
jbattist
Beginner

Ed,

     Can you post your configurations from each router?  The configuration on each router has to be unique to the routers environment.  If you post the configs, we can just verify they are set up properly.  Change the public IP address if you are concerned about posting your IP here.  Thanks.

Create
Recognize Your Peers
Polls
How would you describe your level of technical expertise?