01-27-2010 07:07 AM
We've recently purchased a SA520W router for our company, hoping that the gigabit networking combined with VLAN and N-protocol WLAN would be a perfect companion for our videoconferencing systems (Tandberg T150 desktop model and Tandberg C20) and the use of laptops both to our own employees and guests. The first impression is that the range of this router isn't as good as i hoped, but that's not really the matter here.
It seems as the SA520W router has an issue with our Tandberg systems. The router is stable and fast when only computers are connected to it, both via wired or wireless connection, but as soon as one of the Tandberg systems is connected, it drops every connection (both wired and w.less) with the computers, and it is practically impossible to use WAN (Internet). When I finally can connect to it from my computer, it only stays connected for a couple of minutes, maximum five, and I have to disconnect the Tandberg system and perform a hard reboot of the router (power off, power on) and wait five minutes for it to get online again.
I have tried the live chat support function here, and it was great. I've been asked to replicate the error, but now with logging activated, and send my logs to the guy I talked to. I plan to do so tomorrow or the day after, and I hope that will help, but I thought it couldn't hurt to try the forum as well, maybe someone else has encountered a somewhat similar issue? The support guy got a hunch that it could be a multicast issue, but I really don't know how to even begin to fix that.
Any thoughts would be very helpful!
Thanks,
Erik Skavold
02-11-2010 03:57 PM
Hi Erik,
Can you get a sniffer of the LAN when this happens?
Administration -> Diagnostics -> Packet Trace
Recreate the issue and please post the trace here.
Could you also send me your config?
Thanks
Steven
02-15-2010 01:10 PM
Were you able to get any sniffers of this problem?
02-16-2010 01:09 PM
We were able to recreate this problem and working on a fix.
Thanks Erik.
03-08-2010 08:42 AM
Great. Do you have any ETA for this fix ..?
03-09-2010 08:21 AM
It should be before the end of the month. I can't give the exact dates, and because it is software, the dates can change. But we do plan on having this working soon.
03-26-2010 02:46 AM
Sorry for nagging, but I just wanted to hear if there are any updates on this matter ..?
//Erik
03-26-2010 07:07 AM
Yes, I do have an update. I am PMing you some of the details.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide